How To Remove A Regency Fireplace Insert. I show you how i clean a wood stove or fireplace insert fan with an 18 volt ryobi leaf blower. Check the label on the unit and if there is a difference, the label on the unit is the correct one.
The stainless smoke deflector is located in the upper front area of the firebox. Look specifically for spider webs and other dust bunnies. I had never used the fireplace in the 5 years i lived here.
If There Are Gaps And The Existence Of A Stone/Masonry Encasing It Is An Insert.
The manual tells you how to do it. If the pilot light goes out, redo the procedure and wait for more than a minute before you release the gas control knob. After approximately one minute, release the gas control knob.
At This Point, The Pilot Light Should Continue To Burn.
If you have a concrete insert, you could be putting your entire house in danger! Rocky mountain stove your fireplace store, has a great selection of fireplaces, gas fireplace inserts, wood stoves, gas grills, smokers and bbq's, pellet grills, from hearthstone, regency fireplaces, morso, rais, enviro and jotul stoves, we also carry a wide selection of chimney, hearth pads and fireplace tools. You may have to gently pry the housing away from each side of the lower part of the stove front.
Depress The Gas Control Knob Fully.
We renovated the kitchen a couple of years later and removed the fireplace surround and back panel, along with the fireplace insert. Talk to one of our parts. In this video we replace the blower in our wood stove fireplace insert due to the noise it was making.
Learn On How To Safely Handle, Remove And Clean Stainless Steel Faceplates And Glass Doors, Light The Pilot On Regency Gas Fireplaces Or Use And Program Your Remote Control.
To remove the blower housing take a look at the attached picture. The blower housing is attached to the lower shelf by a couple of clips. When these fans are clean, they are quieter and run better.
How Do You Light The Pilot Light On A Regency Gas Fireplace?
These are removed both to clean the baffles as well as the inside top of the insert. To remove a fireplace surround, you’ll need to find what’s attaching it to the wall. At regency, we have developed fireplace product lines & tools designed specifically to help builders, architects & designers.